Доза AUDIO-TECHNICA AT-VM95EN
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.
- Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 23,000Hz frequency response
270.00лв.
Налични са само 1 .
Model | AT-VM95EN |
Type | VM Stereo Dual Magnet |
Mounting | 1/2” centres |
Frequency Response | 20 – 23,000 Hz |
Channel Separation | 22 dB (1 kHz) |
Output Channel Balance | 2.0 dB (1 kHz) |
Output Voltage | 3.5 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force Range | 1.8 – 2.2g (standard 2.0 g) |
Stylus Shape | Elliptical |
Stylus Size | 0.3 x 0.7 mil |
Stylus Construction | Nude Round Shank |
Cantilever | Aluminium Pipe |
Coil Impedance | 3.3 kΩ (1 kHz) |
Coil Inductance | 550 mH (1 kHz) |
DC Resistance | 485 Ω |
Static Compliance | 20 x 10 – 6 cm / dyne |
Dynamic Compliance | 7 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil | T.P. Copper |
Recommended Load Impedance | 47,000 Ω |
Recommended Load Capacitance | 100-200 pF |
Cartridge Weight | 6.1g |
Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus | AT-VMN95EN |
Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers Non-magnetic screwdriver |
Тегло | 0.2 kg |
---|