Доза AUDIO-TECHNICA AT-VM95E

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response

115.00лв.

Налично

ModelAT-VM95E
TypeVM Stereo Dual Magnet
Mounting1/2” centres
Frequency Response20 – 22,000 Hz
Channel Separation20 dB (1 kHz)
Output Channel Balance2.0 dB (1 kHz)
Output Voltage4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle23°
Vertical Tracking Force Range1.8 – 2.2g (standard 2.0 g)
Stylus ShapeElliptical
Stylus Size0.3 x 0.7 mil
Stylus ConstructionBonded Round Shank
CantileverAluminium Pipe
Coil Impedance3.3 kΩ (1 kHz)
Coil Inductance550 mH (1 kHz)
DC Resistance485 Ω
Static Compliance17 x 10 – 6 cm / dyne
Dynamic Compliance7 x 10 – 6 cm / dyne (100 Hz)
Wire Used for CoilT.P. Copper
Recommended Load Impedance47,000 Ω
Recommended Load Capacitance100-200 pF
Cartridge Weight6.1g
Dimensions17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement StylusAT-VMN95E
Accessories IncludedTwo 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Тегло0.2 kg

Доза AUDIO-TECHNICA AT-VM95E

Налично

115.00лв.

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response

ModelAT-VM95E
TypeVM Stereo Dual Magnet
Mounting1/2” centres
Frequency Response20 – 22,000 Hz
Channel Separation20 dB (1 kHz)
Output Channel Balance2.0 dB (1 kHz)
Output Voltage4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle23°
Vertical Tracking Force Range1.8 – 2.2g (standard 2.0 g)
Stylus ShapeElliptical
Stylus Size0.3 x 0.7 mil
Stylus ConstructionBonded Round Shank
CantileverAluminium Pipe
Coil Impedance3.3 kΩ (1 kHz)
Coil Inductance550 mH (1 kHz)
DC Resistance485 Ω
Static Compliance17 x 10 – 6 cm / dyne
Dynamic Compliance7 x 10 – 6 cm / dyne (100 Hz)
Wire Used for CoilT.P. Copper
Recommended Load Impedance47,000 Ω
Recommended Load Capacitance100-200 pF
Cartridge Weight6.1g
Dimensions17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement StylusAT-VMN95E
Accessories IncludedTwo 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Тегло0.2 kg

Доза AUDIO-TECHNICA AT-VM95E

115.00лв.

Налично

Още информация / Ревю

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response

ModelAT-VM95E
TypeVM Stereo Dual Magnet
Mounting1/2” centres
Frequency Response20 – 22,000 Hz
Channel Separation20 dB (1 kHz)
Output Channel Balance2.0 dB (1 kHz)
Output Voltage4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle23°
Vertical Tracking Force Range1.8 – 2.2g (standard 2.0 g)
Stylus ShapeElliptical
Stylus Size0.3 x 0.7 mil
Stylus ConstructionBonded Round Shank
CantileverAluminium Pipe
Coil Impedance3.3 kΩ (1 kHz)
Coil Inductance550 mH (1 kHz)
DC Resistance485 Ω
Static Compliance17 x 10 – 6 cm / dyne
Dynamic Compliance7 x 10 – 6 cm / dyne (100 Hz)
Wire Used for CoilT.P. Copper
Recommended Load Impedance47,000 Ω
Recommended Load Capacitance100-200 pF
Cartridge Weight6.1g
Dimensions17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement StylusAT-VMN95E
Accessories IncludedTwo 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Тегло0.2 kg

Най-често разглеждани: