Грамофон Audio-Technica AT-LPW40 Manual Belt Drive Wood Base Turntable

  • Дървена база със завършек орех
  • Вграден предусилвател с избор на линеен/фоно сигнал
  • Ръчно управление, поддържа скорости 33-1/3 и 45 RPM
  • Глава AT-HS4 и доза AT-VM95E Dual Moving Magnet
  • Професионален анти-резонансен отлят от алуминий диск с гумена подложка
  • Право карбоново рамо с хидравличен контрол на повдигането


Налични са само 1

Грамофон Audio-Technica AT-LPW40

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminium platter with rubber mat
  • AT-HS4 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
  • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Drive MethodBelt-drive
Type2-speed, fully manual operation
MotorDC servo motor w/speed stability control
Speeds33-1/3 RPM, 45 RPM
Wow and Flutter< 0.15 % WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio> 60 dB
Output LevelPre-amp: “”PHONO””: 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “”LINE””: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain35 dB nominal, RIAA equalized
Power Supply Requirements100 to 240 V, 50/60 Hz
Power Consumption1 W
Dimensions117 x 420 x 340 (H x W x D mm)
Weight5.0 kg
Accessories IncludedAT-HS4BK Headshell,
AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus
Detachable RCA output cable (dual RCA male to dual RCA male)
AC adapter
45 RPM adapter
Rubber mat
Cartridge & Stylus
TypeVM Dual Magnet
Output Voltage4 mV (at 1.5 kHz, 5cm/sec)
Vertical Tracking Force Range1.8 to 2.2 g (standard 2.0 g)
Stylus ShapeElliptical
Stylus Size0.3 x 0.7 mil
Recommended Load Impedance47,000 ohms
Weight6.1 g
Replacement StylusAT-VMN95E and all other Styli from the VM95 Series
Weight8.5 g
Tone arm
TypeStatic balanced straight carbon tone narm
Effective Length223.6 mm
Overhang18.6 mm
Maximum Tracking Error AngleLess than 2 degree
Anti-skating Range0-3 g


Все още няма отзиви.

Само влезли клиенти, които са поръчали този продукт, могат да оставят отзив.