BG 
EN 
Грамофон Audio-Technica AT-LP2X
545.00 лв.
Налични са само 1 .
Грамофон Audio-Technica AT-LP2X
- Напълно автоматичен
- Вграден RIAA коректор с превключване за избор на фоно или линеен сигнал
- 33⅓ & 45 оборота в минута
- доза AT91R
- Сменяем AT-HS3 носач
- Балансирано право рамо
Грамофон Audio-Technica AT-LP2X
Advanced Fully-Automatic Belt-Drive Turntable
A revolution in automation, the LP2X blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP2X represents the next level for vinyl lovers.
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouration
| Turntable | |
|---|---|
| Type | Fully Automatic, Belt-Drive |
| Motor | DC motor |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium |
| Wow and Flutter | Less than 0.25% (WTD) @ 3 kHz (JIS) |
| Signal-to-Noise Ratio | > 50 dB |
| Output Level | “PHONO” 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec “LINE” 129-313 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain | 36dB nominal, RIAA equalised |
| Power Supply Requirements | 220 to 240 V / 50, 60 Hz |
| Power Consumption | 2W |
| Dimensions | 435 mm ×353 mm×128 mm (W×D×H) |
| Weight | 5.2kg |
| Accessories Included | Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable |
| Cartridge & Stylus | |
|---|---|
| Model | AT91R |
| Type | VM Dual Magnet |
| Output Voltage | 3.5mV (mV at 1kHz, 5 cm/sec) |
| Vertical Tracking Force Range | 1.5 to 2.5g (standard 2.0g) |
| Stylus Construction | 0.6 mil bonded conical |
| Cantilever | Aluminium pipe |
| Recommended Load Impedance | 47,000 ohms |
| Weight | 5.0g |
| Headshell | |
|---|---|
| Model | AT-HS3 |
| Weight | 11.1g |
| Overhang Adjustment | 8mm |
| Tone arm | |
|---|---|
| Type | Static balanced straight shaped with soft damping control |
| Effective Length | 221.5mm |
| Overhang | 19mm |
| Maximum Tracking Error Angle | Less than 3° |
| Stylus Pressure Adjustment Range | 1 to 4g |
| Applicable Cartridge Weight | 14.5 to 20g |
| Anti-skating Range | 0 – 3 g |