Грамофон Audio-Technica AT-LP140XP Professional Direct-Drive Turntable

  • Вграден RIAA коректор (предусилвател)
  • Избор между phono и линеен изходен сигнал
  • USB връзка с компютър за запис
  • 33/45/78 оборота в минута
  • Мощен директ-драйв мотор
  • Изцяло ръчно управление
  • Динамичен анти-скейт контрол с настройка
  • Професионална антирезонансна масивна алуминиева чиния
  • Experience high-fidelity audio and professional DJ performance
  • С доза AT-XP3 монтирана на универсална глава AT-HS6

779.00лв.

Налично за поръчка по каталог

Грамофон Audio-Technica AT-LP140XP

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½”-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

  • Experience high-fidelity audio and professional DJ performance
  • Direct-drive, high-torque servo motor with speed stabilization
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Selectable 33/45/78 RPM speeds
  • Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
  • AT-HS6 universal ½”-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
  • Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
  • Dedicated phono-level output (5.5 mV)
  • Stroboscopic platter with speed indicator
  • Forward/reverse operation and variable pitch control with quartz speed lock
  • Retractable plug-type target light for easier cueing in low light
  • Damped base construction for reduced low-frequency feedback coloration
  • Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
  • Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)
Turntable
Drive MethodDirect drive
Type3-speed, fully manual operation
MotorHigh-torque DC motor
Speeds33-1/3 RPM, 45 RPM, 78 RPM
Pitch Variation+/-8% or +/-16% or +/-24%
Turntable PlatterDie-cast aluminium
Starting Torque2.2 kgf-cm
Wow and Flutter<0.2% WRMS (33 RPM)
Signal-to-Noise Ratio>50 dB
Output Level5.5 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements115/230V AC, 60/50 Hz
Power Consumption4.3 W
Weight10.0 kg
Cartridge & Stylus
ModelAT-XP3
TypeVM Dual Magnet
Output Voltage5.5 mV (@ 1.0 kHz, 5cm/sec)
Vertical Tracking Force Range2.0 to 4.0 g (standard 3.0 g)
Stylus ShapeConical
Stylus Size0.6 mil
Recommended Load Impedance47,000 ohms
Weight6.2 g
Headshell
ModelAT-HS6
Weight9 g
Tone arm
TypeBalanced S-shaped tonearm with detachable headshell
Effective Length230.5mm
Overhang16mm
Maximum Tracking Error AngleLess than 3 degree
Applicable Cartridge Weight3.5 – 8.5 g
Anti-skating Range0-4 g

Отзиви

Все още няма отзиви.

Само влезли клиенти, които са поръчали този продукт, могат да оставят отзив.